ufres.blogg.se

NOTE: To learn more about IP Addresses, Subnets, and Gateways, check out this article HERE.

Also, if any devices will be accessing this PLC from another Subnet through a router, also enter in the Default Gateway for this PLC’s Subnet. If you are unfamiliar with how to do this follow my step-by-step article HERE: 2) Once online, double click on “Channel Configuration” in the Project Tree to open it: 3) Select the Channel 1 tab, and if either BOOTP or DHCP is selected un-select it: 4) Now, at a minimum you must enter in your in your IP Address and Subnet Mask. 7) After downloading, I recommend transferring the newly downloaded program to the controller’s Memory Module (if you have one installed.) Setting a SLC-5/05’s IP Address Online: 1) Setup RSLinx Classic and go online with your SLC-5/05. 6) You are now ready to download the program with the new IP Address to your SLC-5/05, which you can learn how to do via Ethernet HERE, or via Serial HERE. 5) Now click on “Apply,” and then “OK,” then save your project. If any devices will be accessing this PLC from another Subnet, also enter in the Default Gateway for the PLC’s Subnet. Setting a SLC-5/05’s IP Address Offline: If you have a project file for your SLC-5/05 controller that your want to edit and download, follow these steps: 1) Open your project in RSLogix 500: 2) Now in the Project Tree double click on “Channel Configuration” to open it: 3) Select the Channel 1 tab, then if either BOOTP or DHCP is selected, un-select it: 4) Now enter in your in your IP Address and Subnet Mask at a minimum. How to set the Ethernet IP Address of a SLC-5/05 Controller using RSLogix.